The Oven

Project World => Win10PE SE HomePage => Topic started by: jlochhead on December 28, 2019, 10:41:33 PM

Title: Win10PE_SE_2019-04-12
Post by: jlochhead on December 28, 2019, 10:41:33 PM

I can't build this release. I keep getting an error with something like %sourcedir%\Source(not supported). I set my windows source to my DVD location  E:\, but no what I set it to I keep getting this error. I have had not had any problems with building releases from 2017.

Title: Re: Win10PE_SE_2019-04-12
Post by: James on December 28, 2019, 11:07:51 PM

Should not use Media from your DVD Drive...
Copy the Contents of the Media into a Folder on your HDD
Then Point to that folder on your HDD

Title: Re: Win10PE_SE_2019-04-12
Post by: jlochhead on December 29, 2019, 12:10:57 AM

I tried copying the contents of the DVD to a folder, but no luck. I also tried mounting the iso image, but that still didn't work. A quick look at the scripts looked to me that might be there a problem there. I just keep getting the (not supported) error. Has anyone been to make a build using this version. I also tried on Windows 8.1 and Windows 10 machines.

Title: Re: Win10PE_SE_2019-04-12
Post by: APT on December 29, 2019, 12:22:21 AM

Hi jlochhead

which Win10 source are you trying to use? (version)

Title: Re: Win10PE_SE_2019-04-12
Post by: Lancelot on December 29, 2019, 12:25:52 AM

Hi jlochhead

on a search engine box
https://www.google.com
https://yandex.com
etc.

, write this :

Code: [Select]

%sourcedir%\Source(not supported) site:theoven.org

Title: Re: Win10PE_SE_2019-04-12
Post by: jlochhead on December 29, 2019, 01:46:13 AM

I have tried many versions from the latest 1909 back to 1703. The problem doesn't seem to be with the version. I have a MSDS subscription so I can get any version of Windows.

Title: Re: Win10PE_SE_2019-04-12
Post by: Lancelot on December 29, 2019, 11:12:20 AM

Hi jlochhead,

search with google, or follow instruction on Main Plugin.
as you see all others at current topic can build with Win10PESE  :wink:

use 1809 source for now.  :great:

Title: Re: Win10PE_SE_2019-04-12
Post by: jlochhead on December 30, 2019, 02:02:49 AM

Perhaps the problem is when I select the source for the Windows files. I click on the folders icon, then browse to the location of the source files which then appears in the box. After I start the build then I get an error. I then look at the source box and it is set to %BaseDir%\Source. Am I doing something wrong? I thought I was following the instructions. I know for sure that the %SourceDir% keeps getting set to %BaseDir%\Sources no matter what I do.

Title: Re: Win10PE_SE_2019-04-12
Post by: Malok on December 30, 2019, 04:08:17 PM

Did you click the [attach=1] button after selecting your source ?

Title: Re: Win10PE_SE_2019-04-12
Post by: jlochhead on December 30, 2019, 04:40:48 PM

Yes I did click the Set Source button, but that didn't seem to help.

Title: Re: Win10PE_SE_2019-04-12
Post by: Malok on December 30, 2019, 05:56:33 PM

Try to Erase everything that is behind "SourceDir=" in [Main] section of \Projects\Win10PESE\Script.Project

open your Winbuilder, Select your project and run this command in the [Process] section of a code box. (Use the green play button up-right).

Code: [Select]

Call,SourceDirSet,c:\YourSourceFolder

verify if "SourceDir=" in [Main] section of Script.Project contains your path, post back the log created by the action.

Title: Re: Win10PE_SE_2019-04-12
Post by: jlochhead on December 31, 2019, 01:19:21 AM

OK I finally figured this out. On the main screen the Sourced tab at the top is useless don't use it. On the left side click the Config Source script and then the Script tab at the top. Then click on the Folders icon and navigate to the location of the sources. Then click on the Set Source button. The latest versions of Windows 10 don't work, but 1809 and probably earlier versions will work. The process of setting the sources location is certainly not intuitive.

Title: Re: Win10PE_SE_2019-04-12
Post by: Malok on December 31, 2019, 06:10:05 PM

The source tab will be automatically filled by running the Config Source Plugin...

Glad you got it going, Take the time to read carefully the info in plugins there are valuable info there and also you can view http://theoven.org/index.php?board=35.0 (http://theoven.org/index.php?board=35.0) to get quick start information and answers to FAQs.

Regards.